|
DX 180 graphite
with ss tang insert
|
|
Style
DX 180 is a high purity flexible graphite, mechanically bonded to a
.004" stainless steel tang for maximum strength and reinforcement.
Commonly used to seal steam, organic and inorganic bases, solvents, oils,
& fuels and service conditions up to 850°F in oxidizing atmospheres, 1200°F in steam |
|
|
98% Purity |
|
|
.004"
SS Tang Insert |
|
|
Great
Chemical Resistance |
|
|
Compatible
with Steam to 1200°F |
| |
|
|
Physical Properties |
|
Color |
Silver-Black |
|
Density (lb/cubic
ft) |
70 lb/ft3 |
|
Maximum Temperature in
Oxidizing Atmosphere |
850° |
| Maximum
Service Pressure (psi) |
2000 psi |
| Compressibility
@ 5000 psi (%) |
35% |
| Recovery
Minimum (%) |
17% |
| Creep
Relaxation ASTM F38B (max%) |
4% |
| Gas
Permeability - Nitrogen DIN 3535/6 |
2800 |
| Pressure
X Temperature ( °F x psi) - 1/16" |
700,000 |
| Ash
Content - DIN 51903 |
<2% |
| Chloride
and Fluoride Content |
<50
ppm |
|
|
 Download MSDS for Style DX 180
|
 |
| |
Download a PDF Spec Sheet for Style 180 |
|
|
| |
Download a Brochure
for our Flexible Graphite Gasket Material |
 |
| |
|
|
|
| * Physical properties and values shown are typical. Specific application data should be evaluated for suitability, through independent study. For specific application recommendations consult DXSeal. Failure to select proper sealing products could result in property damage and/or serious personal injury. Specifications are subject to change without notice. |
|
